Introduction

The Jewett Hyperextension brace helps to control spinal posture. Often prescribed for compression fractures or fractures on the anterior aspect of the spine. The brace promotes healing and reduces pain by providing stability to the spine.

It will remind you to keep your back upright and straight.

General Care

• Your doctor will dictate when you need to wear the brace. Typically, the brace is worn whenever sitting or standing, not worn to sleep in.
• The brace will feel uncomfortable when you begin to move into positions that should be avoided.
• Tasks involving bending, twisting, reaching and heavy lifting should be avoided and minimised while the brace is required to be worn.
• Clothing should be worn under the brace, we recommend one layer of clothing underneath the brace and other clothing over the outside of the brace.

Application

The Jewett can be put on either by lying or sitting. This will be dictated by your physician. When lying, roll onto the back pad without twisting or bending your back.

To close the straps, insert the right keyhole piece over the pin and pull firmly. Flip the latch on the other side to tighten the brace on.

If the brace ‘rides up’ or twists, it is too loose. The brace must be worn very tight.

Feature 1

Height and width adjustable uprights create a customizable fit for various patient anatomies.

Feature 2

Tightening control provides optimal tightening after donning.

Feature 3

Breathable material – The spacer fabric is a breathable material that covers the surface areas of the brace for comfortable wear.

Feature 4

Pivoting pelvic bar prevents the brace from riding upwards when the patient goes from standing to sitting.

Removal

Step 1
Log roll onto your side

Step 2
Flip open latch on left side

Step 3
Roll onto your back

Step 4
Open the keyhole latch on the right side and open brace like a book